Publicidad
EN
– volume control wheel;
①
– USB Type-C connector;
⑤
dongle's LED indicator;
Purpose: The Lorgar Noah 701 is a wireless headset to play audio off your computer,
gaming or mobile device with BT function and voice calls.
Design features: 195×185×80 mm; ABS plastic, polyurethane; retractable microphone;
volume control.
Functional features. Connection: BT (5.1, up to 10 m, 10 dBm, 0.01 W), 3.5 mm AUX cable.
Battery: non-removable, lithium polymer, 1000 mAh (power supply output: 5 V / 1 A DC);
≥300 recharge cycles; full charge: 2 hours. Autonomous work: up to 40 hours. Standby mode:
up to 76 hours. Microphone: omnidirectional, (−42 ± 3) dB. Speakers: 40 mm, (123 ± 3) dB,
20-20000 Hz, 32 Ohms. Operating and storage conditions: temperature +10...+45 °C,
relative humidity 45–85 % (non-condensing).
Scope of supply: headset LRG-GHS701, USB cable Type-C (0.8 m), 3.5 mm AUX cable
(1.5 m), USB-dongle, quick start guide.
Before using the headset, set the minimum volume on your device * to avoid hearing
damage. Do not use the headset while driving a vehicle. Do not expose to high temperatures
(from heaters or direct sunlight) or high humidity. Avoid dust or liquids. Clean only after
disconnecting from the power supply and with a dry or slightly damp cloth only. Do not use
any detergents or cleaning agents. Don't let it fall from a height. Do not disassemble or repair
the headset by yourself. If there are any malfunctions, please contact the service center.
1. Charging. Before the first use, fully charge the battery (see fig. B on p. 2). While charging,
the LED indicator
stops charging.
2. Turning on. Press and hold the button
and blue. When wired, the headset works without turning on (see fig. C on p. 3).
3. Pairing. Turn on BT on your device *, locate and select "Lorgar Noah 701" for pairing. To
delete the pairing information, hold down the buttons
4. Connecting to a PC, PS4 / PS4 Pro / PS5, Nintendo Switch. Insert the USB-dongle into
the USB port of the device * (see fig. D on p. 3), and the driver will be installed automatically.
Hold down the button
headset "Lorgar Noah 701" in the sound settings on the device *.
5. Turning off. Press and hold the button
and go off.
6. Other functional features of the buttons: see fig. E on p. 3.
We hereby reserve the right to change the information contained herein without noticing the
end users. Please find up-to-date information and a detailed description hereof, connection
and operation steps, certificates, warranty conditions in the complete user manual at
lorgar.eu/drivers-and-manuals. Manufacturer: ASBISc Enterprises PLC, Iapetou, 1, Agios
Athanasios, 4101 Limassol, Cyprus. Made in China. All trademarks and brand names are the
property of their respective owners.
4
EXTERIOR (see fig. A on p. 2)
– mute button;
②
– 3.5 mm AUX connector;
⑥
– USB-dongle's function button;
⑨
SPECIFICATIONS
SAFE USE GUIDELINES
GETTING STARTED
lights red; when fully charged, it goes off and the headset
③
for 3 seconds until the LED indicator
④
FURTHER INFORMATION.
* Device means a computer, a laptop, a tablet, a smart TV, etc.
– LED indicator;
③
for 3 seconds until the LED indicator
④
and
④
for 2 seconds, the LED indicator
④
– multifunction button;
④
–microphone;
⑦
– USB-dongle.
⑩
simultaneously for 3 seconds.
②
stops flashing. Select the
③
– USB-
⑧
flashes red
③
will light red
③
Publicidad
