Publicidad
Idiomas disponibles
Idiomas disponibles
Tractor Shut Down Procedure
It is essential that the tractor be shut down as noted below before making any
inspections, maintenance and/or repairs to the tractor and/or mower.
1. Park tractor on a level surface. Don't work under or around an implement
parked on a steep incline.
2. Place tractor in park and set park brake.
3. Disengage PTO if operating.
4. Shut engine off and remove switch key.
5. Wait for PTO to come to a complete stop before dismounting tractor.
6. Wear safety glasses.
Transporting
CAUTION!
When traveling on public roads whether at night or during the day, use accessory
light and devices for adequate warning to operators of other vehicles. Comply
with all federal, state, and local laws.
1. When raising mower to transport position, be sure driveline does not contact
tractor or mower. Adjust and set tractor's 3-Point lift height so that the driveline
does not contact mower deck in the fully raised position.
2. Be sure to reduce tractor ground speed when turning, leaving enough
clearance so that the mower does not contact obstacles such as buildings, trees,
or fences.
3. Select a safe ground travel speed when transporting from one area to another.
When traveling on roadways, transport in such a way that faster moving vehicles
may pass safely.
4. When traveling over rough or hilly terrain, shift tractor to a lower gear.
Safety Information
DANGER!
Do not engage tractor PTO while hooking-up and unhooking the driveline or while
someone is standing near the driveline. A person's body and/or clothing can
become entangled in the driveline resulting in serious injury or death.
DANGER!
Mower can discharge objects at high speeds if guards and safety shields are not in
place and closed.
DANGER!
Gearbox and driveline shields must be secured in place when operating the
mower to avoid injury or death from entanglement in rotating drivelines.
DANGER!
Publicidad
