Publicidad
FIRST STAGE
TUTORIAL
The Neptune III should be used with this high performance, balanced diaphragm 1st stage with anti-freeze
kit.
The first stage has adjustable medium pressure and is made of brass with a satin finish body, stainless steel
poppet, Teflon seat, and stainless steel spring.
It is available with the following characteristics:
HOSE
TUTORIAL
EXTRAFLEX QC HOSE
120CM /48" YELLOW
Four layer technology, inner layer non-toxic polyurethane blend.
Polyester first layer reinforcement, thermo rubber jacket.
Polyethylene anti-scratching reinforcement.
HOSE ASSEMBLY
Use a 4mm Allen wrench to remove the LP port plug on the first stage, then screw the loose end of the hose into
the open port and tighten by hand using a 14mm wrench without using excessive force
8.2 First Stage SL 35 TX
*Sold separately for Neptune III basic and some configurations.
•
200 bar Yoke connection (code 9922)
•
300 bar DIN connection (code 9923)
•
2 high pressure ports 7/16 -20 UNF
•
4 Medium pressure ports 3/8-24 UNF
•
Flow rate of approx. 4800 l/m at 140 bar
8.3 Hoses
*Sold separately for Neptune III basic and some configurations.
EXTRAFLEX QC HOSE
80CM /32" BLACK
RUBBER BLACK HOSE
NEPTUNE III Package Owner's Manual rel. 2.1
80CM /32"
.
15
Publicidad
