13 - MAINTENANCE, CLEANING, DISINFECTION AND STORAGE
13.1
MAINTENANCE, CLEANING, DISINFECTION
The Neptune III Package will work perfectly if the periodic program of maintenance, cleaning and disinfection
collected in table 5 is applied during its whole life from the first use. General and visual inspection are related
to the check that all the components and parts are not damaged, without any wear and tear. No damages
must be detected on the face seal, orinasal mask, straps and membranes. If damages are detected, the mask
cannot be used until repair.
TYPE OF
ACTION
GENERAL
FUNCTION
CHECK
GENERAL
AND VISUAL
INSPECTION
LEAK TEST
DISINFECTION
CLEANING /
RINSE
*
REGULATOR
SERVICING
*
MASK
SERVICING
*
These actions can be performed by an authorized OCEAN REEF Servicing Center.
For optimum longevity of the mask and the proper functioning of its parts we recommend rinsing the
mask thoroughly in fresh water after every use. DO NOT clean the visor with any abrasive materials. We
recommend drying the visor, especially the inside parts, with a soft, clean cloth.
BEFORE
AFTER A
FIRST USE
EACH
USE
X
X
X
X
X
X
Table 5: Periodic maintenance program
EVERY
MONTHLY
DIVE
YEAR
X
X
X
X
NEPTUNE III Package Owner's Manual rel. 2.1
EVERY 2
YEARS
X
27