Descargar Imprimir esta página

Hymer 228000 Instrucciones De Uso página 9

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5
Safety instructions
Ladder classes:
The information on the device indicate by which ladder class the product is categorized.
Suitable for commercial
and private use.
The instructions affixed to the product must always be observed for assembly and when in use.
When the product is used, there is always the risk of falling or tipping over. All work with or on the
product must be carried out to minimise the risk of falling as far as possible. Always observe the
following instructions.
Refer to
instruction
manual/ booklet.
Do not ascend or
descend unless
you are facing the
product.
Do not use the
product on an
unlevel or
unfirm base.
Do not use the
product as a
bridge.
Maximum total
load.
Do not overreach.
Use only with
activated brakes
(if part of the
ladder).
0095690 | 03-2023
Do not wear unsuitable
footwear when climb-
ing the product.
Do not modify the
product design.
Do not erect the
product on conta-
inated ground.
Tool trays or any
surfaces with this
symbol must not be
tread on.
Maximum number
of users.
Do not carry equipment
which is heavy
or difficult to handle
while using the product.
Open the product fully
before use.
Suitable for private use.
Inspect the product after delivery.
Before every use visually check the
product is not damaged and is safe
to use. Do not use a damaged prod-
uct.
Do not use the product if you are not fit
enough.
Certain medical conditions or medication,
alcohol or drug abuse could make the use
unsafe.
Use non-conductive products for
unavoidable live electrical work.
Identify any electrical risks in the work
area, such as overhead lines or other
exposed electrical equipment and do not
max. use the product where electrical risks
occur.
Keep a secure grip on the product when
ascending and descending. Maintain a
handhold whilst working or take
additional safety precautions if you cannot.
Avoid work that imposes a sideways
load on products, such as side-on drilling
through solid materials.
Do not step off the side of the product onto
another surface.
9 | 29

Publicidad

loading

Productos relacionados para Hymer 228000

Este manual también es adecuado para:

228001