EHEIM LOOP pro 26000 Manual De Instrucciones página 13

English
Safety
Risks for persons and property can arise from this appliance if the appliance is improperly used or not used as
intended or if the safety instructions are not heeded.
For your safety
‧ Do not let the appliance packaging and small parts get into the hands of children or people who
are unaware of how to handle them, as hazards can arise (danger of suffocation!). Keep away from
animals.
‧ This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they are under the supervision
of someone responsible for their safety or have received instruction on usage of the appliance from
said person. Children should be supervised to ensure that they do not play with the appliance.
‧ Only for European markets:
This appliance can be used by children from the age of 8 if they are being supervised, have been
instructed in the operation of the device and understand the associated dangers. Children must not
play with the appliance. Children may not perform cleaning and maintenance tasks unless they are
at least 8 years old and are being supervised.
‧ The appliance is operated using the pump and UVC clarifier supplied. Heed the operating manual,
especially the chapters concerning the safety, commissioning, operating and maintenance of these
components!
‧ Before use, carry out a visual inspection to ensure that the appliance is undamaged.
‧ Do not use the appliance if it is not working properly or is damaged.
‧ Only carry out the work described in these instructions.
‧ Never make technical modifications to the appliance.
‧ Only use original spare parts and accessories for the appliance.
‧ When the UVC clarifier is fitted, the device's safety distance from the water must be at least 2 m.
Commissioning
Removing the filter container cover (⌦A)
1. Open all six fastening clips (⌦A➊).
2. Lift the filter container cover off the filter container (⌦A➋).
3. Remove all components from the filter container.
Fitting the backwash connecting piece (⌦B)
1. Fit the flat seal ② onto to backwash connecting piece ①.
2. Insert the backwash connecting piece from the inside through the opening in the filter container.
3. Fasten the backwash connecting piece with the union nut ③.
4. Insert the sealing washer ④ into the plug ⑤.
5. Seal the backwash connecting piece with the plug.
Installing the UVC clarifier (⌦C)
1. Slip one sealing washer ③ each onto the two threads of the UVC clarifier ④.
2. Insert the UVC clarifier through the openings in the filter container.
13