Publicidad
Idiomas disponibles
Idiomas disponibles
• The refrigerator must be placed on a completely flat surface,
leave between 5 and 10 cm between each side of the
appliance and the wall, 7.5 cm from rear wall, and leave 30
cm between the top of the appliance and the ceiling. An
incorrect location could increase the noise of the device.
• Choose a place that is not exposed to sunlight, high
temperature or humidity, since moisture can cause stains.
• REMOVE the lower panel before installation.
• The appliance can be adjusted by rolling its two legs in when
it is unstable. Rolling clockwise
REVERSIBLE DOORS
The side to which the refrigerator door opens can be altered on the
right side to the left, if the place of installation so requires.
WARNING: In case of changing the door, make sure that the
appliance is completely turned off and disconnected from the
power
supply.
Tools you will need to change the door:
8mm socket wrench
Thin-blade screwdriver
Parts you will need:
Cross-shaped screwdriver
8mm wrench
38
Publicidad
