AMS CT412 BT Instrucciones De Uso página 2

Safety Information
Thank you for purchasing this product, please
read the manual carefully before operating,
and reserve it for future reference.
PRECAUTIONS
• Only in a 12 or 24-volt DC negative-
ground electrical system.
• Disconnect the vehicle's negative battery
terminal while mounting and connecting
the unit.
• When replacing the fuse, be sure to use
one with an identical amperage rating.
Using a fuse with a higher amperage
rating may cause serious damage to the
unit.
• Make sure that pins or other foreign
objects do not get inside the unit, they
may cause malfunctions, or create safety
hazards such as electrical shock.
• If you have parked the car for a long
time in hot or cold weather, wait until the
temperature in the car becomes normal
before operating the unit.
• Keep the volume at a level at which you
can hear outside warning sounds (horns
sirens, etc.).
CAUTION
• D O N O T o p e n c o v e r s a n d d o n o t
repair by yourself. Ask the dealer or an
experienced technician for help.
Specifications
General
Power supply (CT412) : 12V DC (10.8V-16V)
Power supply (CT424) : 24V DC (18V-32V)
Maximum power speaker:
Suitable speaker impedance:
Fuse spec:
Weight:
Dimensions (WxDxH): 188x116.3x58.5mm
FM Stereo Radio
Frequency range: 76 - 90 Mhz (japan mode )
Signal/noise ratio:
AUTO Step:
AM (MW) Radio
Frequency range:
Step:
LW Radio(EURO)
Frequency range:
AUTO Step:
EXT (AUX)
Jack Stereo 3.5mm ≥ 300mV auxiliary source
EN-1
Contents
Safety Information ..................... ..................1
Specifications ............................................... 1
Panel Controls ..............................................2
Button Tips ....................................................3
12V : 4X41W
Bluetooth Functions .................... .................7
24V : 4x20W
USB function Summarization .........................7
4 ohm
Other function .................................................8
10A
DAB+ function .........................................9
0.7kg
FCC ................................................13
Troubleshooting ............................................14
User Safety Code
You need to enter password when power on,
87.5 - 108 MHz
the original password is 1234.
50dB
BEFORE OPERATION
100KHz
• Do not raise the volume level too much,
as this will block outside sounds, making
driving dangerous.
522-1620KHz
• Stop the car before performing any
9KHz
complicated operation.
Note:
1. According to models with different wiring
harness to connect the definition of the
153-280KHz
specific content, please refer to the model
1KHz
label.
2. Specifications and the design are
subject to change without notice due to
improvements in technology.