AMS CT412 BT Instrucciones De Uso página 7

Button Tips
> PWM: frequency - 100 Hz at 12 Volts
Timer ON/OFF
Timer ON: when ignition of the machine is off,
you can turn the unit on by pressing POWER
button, and it can work for about 2 hours
Timer OFF: when ignition of the machine is
off, the unit can't work anymore.
AREA mode
Press [DSP] button more than 2 seconds, then
press [ / ] button several time to select
AREA funtion. Rotate the knob to select
"EUROPE--USA--JAPAN- AUSTRA-LATIN".
NB : the radio will delete the preselected
station memory
LOUD ON/OFF
Press [SEL] to display EQ OFF,then press
[ / ] button several time to select LOUD
function.
Rotate the [volume] knob to select Loudness
ON or OFF.
STEREO/MONO mode
(in Radio mode)
Press [DSP] button more than 2 seconds, then
press [ / ] button several time to select ST/
MONO funtion. Rotate the [volume] knob to
select FM stereo or mono.
LOCAL ON/OFF or RURAL/URBAN
Press [DSP] button more than 2 seconds,
then press [ / ] button several time to
select DX/LO or RURAL/URBAN. Rotate
the [volume] knob to select tuner sensitivity
distant or local.
MIC
In Default settings, the MIC SEL is "REAR".
The micro cable is connected at the rear of
the radio, we advise you not disconnect the
micro cable in order to avoid losing it.
On the non time display menu:
Press and hold [DSP] button more than 2
seconds, then press [ / ] button several
time to select MIC SEL and rotate the [volume]
knob to select "FRONT".
Installation recommandation on page 9.
EN-6