AMS CT412 BT Instrucciones De Uso página 9

Other functions
USB functions(flash memory type)
1. USB flash memory 2 in 1 support
2. FAT 12/FAT 16/FAT 32 format supported.
3. USB 1.1 support, USB 2.0 support (For
2.0,speed performance is as USB 1.1)
4. WMA files supported
5. Maximum number of MP3 files FAT 32 format
supported is 65535 files. (Maximum number
of MP3 files NTFS supported is 1000 files. )
Maximum number of folders is 999.
6. Maximum USB capacity support is 8 GB and
best performance with tracks not more than
500, and not exceeding 30 folders.
7. Not all USB devices are compatible with the
unit.
AUX mode
When radio is on, press [SRC] button several
time, to display AUX.
nb: Control the track with the external device
When using AUX mode, only the POWER knob,
the [volume] and [SRC] button can be used.
Timer function
If the device is switched on while the ignition
is on, it then switches off and on again
automatically with the ignition. This is provided
that the A7 contact is connected to the terminal
15/30 of the vehicle. If the device is switched
on without the ignition by pressing "POWER",
it switches off again after 120 minutes to save
the battery. The device can then be switched on
again with "POWER".
Caution: When the radio is switched on, the
automatic antenna extends.
Therefore always switch off the device when
the situation requires it (e.g. in a station car
wash).
You can stop this function in the MENU.
SRC Button (Only DAB radio)
Press the [SRC] button to switch from Radio,
USB (when USB is connected), AUX (when the
device is connected), BT audio, AD2P (when
the BT device is connected)
Password entered
Rotate the [volume] knob to select the digits,
press the [ / ] buttons to change the digits.
Once the password is fully displayed, press the
[SEL] button at least 2 seconds to confirm, the
radio switches to the last tuner mode listened.
If the password is incorrect, "ERROR" appears
on the display. Please enter the password
again. If the user code is lost, contact the After
Sales Service.
PWD OFF/ON: Activating/Desactivating
the security code.
When the unit is switched on, Press [DSP]
button more than 2 seconds then press
[ / ] button several time to select "PWD
EN-8
OFF/ON" and turn the [volume] knob to
select "ON" or "OFF": the password is
activated or deactivated.
When set to "ON", the radio code will be
requested or if you have disconnected the
permanent + (B + battery), you will have
to enter the password after each time
the battery is disconnected (the default
password is "1234"). If you only turn off
the ignition (+15/30), the code will not be
requested.
PWD NEW: Create a new password
You can set a new password for the unit:
Press [DSP] button more than 2 seconds
then press [ / ] button several time
t o s e l e c t " P W D S E T " , e n t e r y o u r o l d
password, press the [SEL] button at least 2
seconds to confirm. If the old password is
incorrect,"ERROR" "AGN" appears on the
display, please enter the password again.
If the old password is correctly entered,
" N E W " i s d i s p l a y e d , e n t e r y o u r n e w
password, press the [SEL] button at least
2 seconds to confirm. "AGN" is displayed,
enter your new password again and press
the [SEL] button at least 2 seconds to
confirm; "SET OK" is ;displayed: the code
has been updated.