KBT 310 Modo De Empleo página 2

INSTRUCTIONS FOR USE
SAFETY INSTRUCTIONS
1. Please keep this instruction sheet safely for future reference.
2. Please do not modify the product or the assembly details in any way. Modifications will affect the structural in-
tegrity and replacement parts will be at the buyer's expense. Inappropriate use or faulty application of the
product are explicitly forbidden and absolve the manufacturer of all liability. This product needs to be mounted
by an adult before use.
3. The use of the item is allowed only under continuous supervision by an adult. The product is suitable for individ-
uals weighing up to 70 kg. The product is not suitable for children under 36 months, due to a lack of extra
safety precautions and taking into account the limited mental capacities of toddlers.
4. This product meets all security aspects of the European standard EN71-1, EN71-2, EN71-3 and EN 71-8. It is
only suitable for family domestic use, both indoors and outdoors.
5. When installing the product, ensure that the play system or other construction can support the weight (minimum
200 kg) and that there is no risk of entrapment.
6. The product should be at a distance of at least 2 m from all other installations e.g. fences, branches, clothes-line,
...
7. In this safety area no hard, angular or pointed objects should be present. The surface underneath the product
should be flat and shockabsorbing. The product must not be placed on asphalt, concrete or any other hard
surface. We advise the removal and storage of all accessories during the winter because the characteristics of
the soil (when frozen) are not suitable for safe play.
8. The distance between the suspension points along the crossbeam equals or is more than the distance between
the junction points of the product, plus 4% of the distance between the ground and beam. See FIG I.
9. The minimum distance between the accessories should be 45 cm. The minimum distance between the acces-
sory and the frame should be 30 cm.
10. Please ensure that the top rung, knot or rope is never higher than 2.5 m. Please make sure that children do not
climb up the ladder or rope to reach the top beam.
11. Make sure that the upper end of the climbing rope is attached.
12. The distance between the 2 fixing points of the rope ladder (with 2 attachment points) should be the same as the
length of the rungs. It is forbidden to have only one fixing point. It might lead to entrapment of the head if the width
of the 2 fixing points is smaller than that of the rungs.
13. All pieces should be checked regularly. For replacement material and expansion of the playground equipment,
please contact the supplier. Consequently safety will be guaranteed.
14. This product can only be used in combination with sufficiently strong swing hooks with a nylon bearing. Only in
this case the safety can be ensured. It is explicitly forbidden to use the metal rings on a suspension system
without a hinged element.
INSPECTION AND MAINTENANCE
The frequency of inspection and maintenance will vary with the type of equipment or materials used or other
factors (e.g. heavy use, levels of vandalism, coastal location, air pollution, age of equipment, ...). Special
attention should be given to the swing hooks, rings, eights, plastic welds and ropes. Moving metal parts must
be oiled regularly.
Routine visual inspection (weekly to monthly)
- Always check that the bolts and nuts are securely fastened.
- Check the shock absorbing surface for objects that don't belong there.
- Check for missing parts.
- Check the equipment ground clearances.
Operational inspection (1 to 3 months)
- Check the stability of the construction.
- Check every part for excessive wear and replace when necessary.
Annual inspection (1 to 2 times per year)
- Check for rust and corrosion.
- Check every part for excessive wear and replace when necessary.
2
accessories
EN