Publicidad
Idiomas disponibles
Idiomas disponibles
The use of appropriate, approved personal protective equipment reduces the
risk of injury.
f)
Do not overestimate your capabilities. Maintain body balance at all times
during operation. This allows for better control of the device in unexpected
situations.
g)
The device is not a toy. Children should be supervised to ensure that they do
not play with the device.
h)
Watch out for your legs, hands and fingers when using the device.
2.3.
Safe use of the device
a)
Keep unused devices out of the reach of children and anyone not familiar with
the device or these instructions. Devices are dangerous in the hands of
inexperienced users.
b)
Keep the device in good working order. Before each use, check for general
damage or damage to moving parts (cracks in parts and components or any
other condition that may affect the safe operation of the device). If damaged,
have the device repaired before use.
c)
Keep the device out of the reach of children.
d)
Repair and maintenance of the device should be carried out by qualified
persons using only original spare parts. This will ensure a safe use of the device.
e)
To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen any screws.
f)
When transporting and moving the device from the place of storage to the
place of use, follow the health and safety regulations for manual transport that
apply in the country in which the device is used.
g)
It is forbidden to move, shift or rotate the device during operation.
h)
Clean the device regularly to prevent the permanent accumulation of dirt.
i)
Do not work with two objects at the same time.
j)
The device is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
k)
It is forbidden to tamper with the device in order to change its parameters or
construction.
l)
Keep the device away from sources of fire and heat.
m) Do not overload the device.
n)
Ensure that no operating fluids leak from the vehicle when it is lifted and thus
its stable position is changed.
o)
Lift/lower elements in accordance with the specifications in the technical data
table. Do not exceed the permissible parameters.
p)
Make sure that the device will not slip under the load.
q)
Ensure that the jack saddle is completely placed under the element being
lifted.
Publicidad
