Publicidad
Idiomas disponibles
Idiomas disponibles
Close the valve by turning it clockwise. Be careful not to tighten it excessively.
Insert the handle into the socket and pump by alternating downward and
upward movements to lift the load.
LOWERING
Slowly open the valve counterclockwise to lower the load.
TOPPING UP OIL
1. Remove the tank plug.
2. Fill the hydraulic oil to the maximum level while holding the jack upside
down.
3. Replace the plug.
4. Move the handle up and down several times.
5. Gently open the plug to release the air from the tank.
CAUTION:
1. The valve must be turned slowly. If it is opened/ closed too quickly, the load
might fall down.
2. A maximum of two turns in one direction and two turns in the other
direction can be made.
3. Make sure that no dirt has entered the tank. Use only special oils.
3.3.
a)
Use only non-corrosive agents for cleaning the surface.
b)
Store the device in a dry and cool place protected from moisture and direct
sunlight.
c)
Regularly inspect the device for technical failure and damage.
d)
Use a soft, damp cloth for cleaning.
e)
Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or metal
scraper) as these may damage the surface of the device.
f)
Lubricate moving machine parts with machine oil once a month.
Cleaning and maintenance
Publicidad
