Publicidad
Idiomas disponibles
Idiomas disponibles
r)
Ensure that the element is positioned in a stable way so that it cannot slip
during lifting/lowering.
s)
Place the load in the middle of the jack saddle before lifting. The centre of
gravity of the load should be above the centre of gravity of the jack.
t)
Do not work with an unsecured load. The device is designed for lifting, not for
supporting the load during work. When using the jack, secure the lifted vehicle
against falling using supports.
u)
Lowering/lifting must be done in a slow, steady movement. Abrupt
movements are prohibited.
v)
The pressure force must be evenly distributed and acting vertically.
w)
Do not move the device by the lever.
x)
Carefully observe lifting/lowering of the load when using the jack. Do not leave
the load unattended.
y)
It is forbidden to hit the jack or the load attached to it.
z)
Remember to keep the load as low as possible. The higher the load is lifted,
the greater the risk.
aa) Close the handle when not in use. Use only the handle designed for this jack
model.
CAUTION! Although the device has been designed to be safe and has been
equipped with adequate safeguards, and despite the use of additional safety
measures, there is still a small risk of accident or injury when operating the
device. Caution and common sense are advised when using the device.
3. Rules of use
The device is used for lifting and lowering heavy objects such as vehicles during garage
work. It must not be used for lifting people or animals.
The user is responsible for any damage caused by improper use.
Publicidad
