Amprobe TMD-51 Manual De Uso página 15

Supplied Wire
�
- EMC: Conforms to EN61326-1.
This product complies with requirements of the
following European Community Directives: 89/ 336/
EEC (Electromagnetic Compatibility) and 73/ 23/ EEC
(Low Voltage) as amended by 93/ 68/ EEC (CE Marking).
However, electrical noise or intense electromagnetic
fields in the vicinity of the equipment may disturb the
measurement circuit. Measuring instruments will also
respond to unwanted signals that may be present within
the measurement circuit. Users should exercise care and
take appropriate precautions to avoid misleading results
when making measurements in the presence of electronic
interference.
MAINTENANCE AND REPAIR
�WARNING
To avoid possible electrical shock, disconnect the
thermocouple connectors from the thermometer
before removing the cover.
4 feet type "K" thermocouple bead
wire (Teflon tape insulated). Maximum
insulation temperature 200 °C (392°F).
Wire accuracy ±2.2°C or ±0.75% of
reading (whichever is greater) from 0°C
to 800°C.
8