Uline H-6185 Ensamble Manual página 4

3
Figure 4
Header Bolt Hole
Figure 5
11
9
Figure 6
PAGE 4 OF 15
ASSEMBLY CONTINUED
7
6
10
14
5. Insert rear legs (3) into the corner between the
bottom and the side. Bolt the leg to the side using
two bolts and nuts per leg. (See Figure 4)
6. Place door and frame assemblies (6 and 7) over
the locker body. Make certain that body sides are
inside the door frames. Attach top to frame header
and bottom to frame sill. Attach frame to sides using
bolts and nuts. (See Figure 5)
7. Repeat steps 1 to 6 to assemble second 6-tier locker.
HORIZONTAL ASSEMBLY
1. Bolt top (10) and bottom (9) to back panel (14),
placing the flanges of the top and bottom around
the back of the back panel. (See Figure 6)
2. Identify three inner sides for horizontal section (11);
the back of each inner side has a larger flange
than the front. Bolt the three inner sides to the top
and bottom. (See Figure 6)
0321 IH-6185