TRW easycheck Guia página 7

English
Getting started guide
Introduction
Congratulations on choosing the
Easycheck service tool.
This Getting Started Guide will outline
the components of Easycheck and how
to connect and use the service tool.
Before using this service tool refer to
the Operating Instructions on the
enclosed CD ROM.
Getting started
Connect the EOBD cable (YTD950) to
the service tool and secure the fixing
screws.
J1962 Diagnostic socket
Connect the service tool to the vehicle
via the EOBD (J1962) diagnostic socket.
This socket is usually located inside the
passenger compartment in the vicinity
of the driver's footwell. Refer to vehicle
manufacturer's information for the
exact location.
Power for the service tool is provided by
the diagnostic socket. When connected
to the diagnostic socket, the service
tool will perform an internal self test and
then the screen will display the date of
the current software version.
Getting started guide
Unlocking new units
A new or updated service tool requires
a security key to unlock the specific
applications. To register the service tool
and to obtain your unique security key,
call the Product Support Team on +44
(0)870 94 93 794.
After obtaining your security key, follow
this procedure to unlock your service
tool.
1. Select 'User Menu' from the main
menu.
2. Select 'Security' from the user
menu.
3. Select 'Enter Security Key' from
the security menu.
4. Using the and
through the alpha/numerical
character list.
5. Confirm each character by pressing
the key.
If you make a mistake use the
key and enter the correct character.
To re-enter the code from the
beginning, press the
6. When prompted to verify the
security key, press
7. Power down the service tool by
disconnecting the power source.
8. Reconnect the power supply to
restart the service tool. The screen
should now show a list of the
applications included.
keys, scroll
key.
to confirm.
3