Descargar Imprimir esta página

Sauder 424198 Instrucciones De Montaje página 9

Publicidad

Step 5
Flip the ENDS (A and B) over. Turn twelve BLACK 9/16" FLAT HEAD SCREWS (32S) into the END/UPRIGHTS (B) and
å
RIGHT END (A) until the shoulders of the SCREWS rest on the surfaces of each part.
NOTE: Do not overtighten the SCREWS.
å
Slide the END/UPRIGHT MOLDINGS (S) onto the END/UPRIGHTS (B) and the RIGHT END MOLDINGS (R) onto the
å
RIGHT END (A). Line up the grooves in the MOLDINGS over the heads of the SCREWS in the ENDS.
NOTE: The MOLDINGS should be even on both edges of the ENDS.
å
NOTE: If the MOLDING comes up off of the SCREWS, remove it and slide it on again.
å
B
BLACK 9/16" FLAT HEAD SCREW
(12 used in this step)
www.sauder.com/services
S
S
B
32S
S
S
A
Shoulder
424198
BLACK 9/16" FLAT HEAD SCREW
BLACK 9/16" FLAT HEAD SCREW
R
R
Apply pressure with your hands
as you guide the MOLDINGS over
the SCREWS and onto the ENDS.
32S
Page 9

Publicidad

loading