|
825P-850P DIGITAL PULSE OUTPUT METERS
About This Manual
From initial concept and design through final production, your Sotera product is built to provide years of trouble-free use. To ensure
the safety of yourself and those around you, it is critical that this manual is read in its entirety prior to attempting to install or
operate your new purchase. We strongly urge that any installer and operator become familiar with the terms, diagrams, and technical
data in this manual and pay close attention to any DANGER, WARNING, CAUTION, or NOTICE information. At Sotera, your satisfaction
with our products is paramount to us. If you have questions or need assistance with your product, please contact us
at 1 (800) 720-5192 or via email at SoteraTech@fillrite.com (M-F, 8 AM – 5 PM ET).
Symbols and Definitions
DANGER
Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING
Emphasizes an area in which personal injury or even death may result from failure to follow instructions properly. Mechanical damage may also occur.
CAUTION
Failure to observe a "Caution" may cause damage to the equipment.
NOTICE
These boxes contain information that illustrates a point that may save time, or be key to proper operation, or clarifies a step.
General Description
The Sotera 825P and 850P Meters are nutating disk, positive displacement meters that use magnetic coupling to convert fluid flow
into digital display information. The meter can store and display the current total,or cumulative total in any of five programmed units
(ounces, pints, quarts, liters, and gallons) or special units (e.g. per acre volume). The meter can be calibrated without dispensing
fluid by selecting a calibration factor from the 20 stored settings. Power is supplied by two CR2032 batteries that can be replaced
in the field. 825P / 850P models feature pulse output and 4-20mA output for connection to fluid management systems and batch
controllers for the control and monitoring of dispensed fluid.
sotera.com
INSTALLATION AND OPERATION MANUAL
3