Publicidad
Idiomas disponibles
Idiomas disponibles
You can activate Channel 8 through 14 with the following
steps:
1. Press
Menu button until the channel number starts to
flash.
2. Press
and
to hold down simultaneously for three
seconds until you hear a beep and "14 CH" is displayed
briefly.
Note:
• Use Channel 1 to 14 in Peru because these frequencies
are allowed by the government authorities.
• Channel 8 to 14 are not allowed in Argentina.
Selecting the Interference Eliminator
Code
Interference Eliminator Codes help minimize
interference by blocking transmissions from unknown
sources. Your radio has 121 Interference Eliminator
Codes. Codes 1–38 are standard analog codes that
appear on other FRS radios. Codes 39–121 are
additional digital codes added for superior
interference protection. 0 is the off position,
no analog or digital codes are enabled.
Setting the Code for a Channel
1. Press
Menu/Lock button until the code starts to
flash.
2. Press
or
to select the code. Long press on these
keys allows you to scroll through the codes rapidly.
3. Press the PTT button to save the code setting and exit
Menu or
Menu/Lock button to continue set up.
You can set a different code for each channel using
this procedure.
On a radio that uses Interference Eliminator
Note:
Codes, the code must be set to 0 to
communicate with radios that do not have
Interference Eliminator Codes. Select 0 for "no
tone, no code" on the display of your radio.
Setting and Transmitting Call Tones
Your radio can transmit different call tones to other
radios in your group so you can alert them that you
want to talk. Your radio has 20 call tones from which
to choose.
Setting a Call Tone
1. Press
Menu/Lock until
tone setting flashes.
2. Press
or
to change and hear the call tone.
appears. The current call
17
Publicidad
