Publicidad
Idiomas disponibles
Idiomas disponibles
Built-in LED Flashlight
1. Press the flashlight button to turn the light ON.
2. Press the flashlight button again to turn the light OFF.
Turn off the flashlight when not in use to
Note:
conserve battery power.
Built-in LED Flashlight with Power Outage
Function (For T478 Radio Only)
The T478 radio LED flashlight has an additional
power outage function. The power outage function
is enabled when the radio is connected to a power
outlet.
The flashlight is turned on automatically when
power is cut while the radio is charging in the
charging tray or connected to the micro-USB
charger cable. The flashlight is turned off when the
power returns.The flashlight is turned off
automatically after 30 minutes to conserve battery
power.
Keypad Lock
To avoid accidentally changing your radio settings:
1. Press and hold
Menu/Lock button until
2. When in lock mode, you can turn the radio ON and OFF,
adjust the volume, receive, transmit, send a call tone,
send Emergency Alert, turn the LED flashlight ON and
OFF, and monitor channels. All other functions are
locked.
3. To unlock the radio, press and hold
button until
Easy Pairing
The Easy Pairing feature allows a group of radio
users to program all their radios to the same
Channel and Interference Eliminator Code settings
quickly and simultaneously. Any one radio within the
group can be designated as the "Leader's radio"
and have it's Channel and Interference Eliminator
Code settings transmitted to and copied by all the
other radios in the group (Members' radios).
1. Pick any one of the radios as the "Leader's radio". On this
radio, program the Channel and Interference Eliminator
Code to the desired settings.(See "Selecting the
Channel" and "Selecting the Interference Eliminator
Code" sections in this user manual).
2. To copy the channel and Interference Eliminator Code
combination to all the other "Members' radios", press and
hold the button on the Members' radios until you hear a
beep. Release the button after the beep, and wait for the
transmission from the Leader's radio.
Note:
• The icon blinks on the display. This confirms that the
radio is in Easy Pairing mode waiting to receive the
displays.
Channel and Interference Eliminator Code settings from
the Leader's radio. All Members' radios remains in this
mode for 3 minutes.
• A group with many radios should have all users take this
step at the same time, so all radios can be programmed
in one go.
Menu/Lock
is no longer displayed.
21
Publicidad
