Echelon STRIDE-7s Manual De Instrucciones página 27

Place screen mounting base onto console.
Place tablet onto screen
mounting base
With assistance, use (4) Hex Bolts (M), (4) Spring Washers (N), and (4) Flat
Washers (O), to secure the mounting base from underneath the console.
MAKE SURE ALL WIRES ARE CLEAR BEFORE SECURING THE BASE.
Connect the DC
power cable to
the DC IN jack.
Connect the RS232 Plug into the
correlating port, and tighten the
screws on the plug with a very small
flathead screwdriver.
27
2