Echelon STRIDE-7s Manual De Instrucciones página 31

belt adjustment
If the belt has drifted right, unplug the safety lock and
power switch and use the included 8mm Allen wrench to
turn the right adjusting bolt 1/4 turn clockwise. Insert
the power switch and safety lock, run the treadmill, and
observe the running belt's position. Repeat until the
running belt is centered on the running deck.
caution:
Special care must be taken when aligning the running belt. Turn off the treadmill while adjusting or working near
the rear roller. Remove any loose clothing and tie back your hair. Be very careful to keep your fingers and any other
object clear of the belt and rollers, especially in front of the roller and behind the deck. The treadmill will not stop
immediately if an object becomes caught in the belt or rollers.
If you hear any chafing or the running belt appears to be getting damaged, stop the running belt immediately by
pressing the STOP key. Contact Echelon
few minutes. The belt should be centered on the running deck. If the belt drifts off center, you must make adjustments.
For your safety, use the power switch to turn off the treadmill before making any adjustments. Do not adjust the
running belt when someone is standing on the unit.
Do not turn the adjusting bolt more than 1/4 turn at a time. Over tightening the bolt can damage the treadmill. If you
are unsure how to adjust the running belt, contact Echelon
important:
Failure to align the belt may cause the belt to tear or fray, which may not be covered under the Echelon
To stop the running belt, press the STOP key. Turn the treadmill off.
If the belt has drifted left, unplug the safety lock and
power switch and use the included 8mm Allen wrench
to turn the left adjusting bolt 1/4 turn clockwise. Insert
the power switch and safety lock, run the treadmill, and
observe the running belt's position. Repeat until the
running belt is centered on the running deck.
customer service. Walk around to the rear of the unit and observe the belt for a
®
customer service.
®
warranty.
®
31
3