Publicidad
Idiomas disponibles
Idiomas disponibles
MEASURING DC MILLIVOLTS (see figure 7)
Warning
To avoid harm to you or damages to the Meter from electric shock, please do not attempt
to measure voltages higher than 500V, otherwise you cannot obtain correct reading.
The DC Millivolts ranges are: 60.000mV and 600.0mV. If over the range, it displays "OL". To
measure DC Millivolts, connect the Meter as follows:
1. Insert the red test lead into the
terminal.
2. Set the rotary switch to
3. Connect the test leads across with the object being measured.
The measured value shows on the display.
Note:
• The maximum input impedance is 4000MΩ.
• When DC Millivolts measurement has been completed, disconnect the connection between the
testing leads and the circuit under test, and remove the testing leads
32
Figure 7. Measuring DC Millivolts
terminal and the black test lead into the COM
Publicidad
