Descargar Imprimir esta página

Vitamix VM0100 Manual De Instrucciones página 6

Ocultar thumbs Ver también para VM0100:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 41
IMPORTANT NOTES!
Vitamix machines come with several different control options. Please ensure that you are following the instructions for your model.
Drink Machine Advance/Bar Boss Advance Model
1.
On/Off Switch: Located on the front of the machine below the control panel (Figure A).
The On/Off switch controls the power to the machine. While plugged in, switch to on
to ready the machine for blending. Shut off the power switch at night or whenever the
machine will be left unattended.
2. Start (
)/ Stop (
) Switch: This is a lighted switch. When the light is lit, the power
is on. Depress the start switch to activate a programme setting and again to stop a
programme mid blending cycle. During operation, you may interrupt a programme by
pressing the Start/Stop switch.
3. Programme Dial: Allows the user to select a number of pre-programmed settings. The
machine will shut off automatically at the end of the programme. A programme can only
be activated when the power switch is on.
4. Pulse Switch (
): The pulse switch can be used to quickly refresh the contents of the
container by depressing the switch and holding it down for as long as needed. The pulse switch can only be used when the power switch is on.
Drink Machine Two-Step Model
1. On/Off Switch: Up for ON. Down for OFF. All times are total times. During operation, you may interrupt the timer
by pressing the START/STOP switch.
2. Timer Dial: Allows the user to select a number of timed settings. Increments on the timer are approximate seconds.
The timer can only be activated when the power switch is ON. The blender will shut off automatically at the end
of the pre-set time.
3. Start (
)/ Stop (
) Timer Switch: This is a lighted switch. When the light is lit, the power is ON. Depress the
START/STOP TIMER switch to activate the timer setting and again to stop a blending cycle.
Bar Boss Model
1. On/Off Switch: Located on the front of the machine below the control panel (Figure A).
The On/Off switch controls the power to the machine. While plugged in, switch to on
to ready the machine for blending. Shut off the power switch at night or whenever the
machine will be left unattended.
2. Timer Dial: Allows the user to select a number of timed settings. Increments on the timer
are approximate seconds. The timer can only be activated when the power switch is ON.
The blender will shut off automatically at the end of the pre-set time.
3. Start (
)/ Stop (
) Timer Switch: This is a lighted switch. When the light is lit, the
power is ON. Depress the START/STOP TIMER switch to activate the timer setting and
again to stop a blending cycle.
4. Pulse Switch (
): The pulse switch can be used to quickly refresh the contents of the container by depressing the switch and holding it down for as long as needed. The pulse switch can
only be used when the power switch is on.
Drink Machine Two-Speed Model
1. On/Off Switch: Up for ON. Down for OFF.
2. High/Low Switch: Up for HIGH. Down for LOW.
6
c
p
o n t R o l
a n e l S
FIGURE A
FIGURE A

Publicidad

loading