Publicidad
Idiomas disponibles
Idiomas disponibles
8.
9.
9. Put the two covers back on the top of the freezer making sure the larger hinge
10.
cover goes on the hinge on the left-hand side. See Figure 10.
11.Put the hinge cover and the screw cover
back.
12. With the doors closed,check that the doors
are aligned horizontally and vertically and
that the seal is closed on all sides before finally
tightening the bottom hinge.Re-adjust the
levelling feet as needed.
10. Detach the door gasket, rotate 180 degrees and reattach it. See Figure 11.
Installing the Door Handle
To attach the door handle to the door edge that opens:
1. Remove the two screws and two screw plugs from the door.
2. Align the holes on the door with those on the handle and insert two screws and
secure into place. Press the two caps over the heads of the screw.
3. Insert the two screw plugs onto the opposite side of the door.
5/ USE
FIRST USE
Cleaning the Interior
Before using the appliance for the first time, wash the interior and all internal
accessories with lukewarm water and a mild soap. Dry thoroughly. This will clear the
typical smell of a brand-new product.
IMPORTANT! Do not use detergents or abrasive cleaning materials as these will
damage the finish.
Temperature Setting
IMPORTANT! If the appliance has been moved, wait at least four hours for fluids
inside to balance before plugging it in and turning it on.
■ Plug in your appliance.
■ The internal temperature is controlled by a thermostat. There are three settings:
MIN, NORMAL and MAX (see Figure 12). MIN is the warmest temperature and
MAX is the coldest temperature setting.
12
Publicidad
