MSW Motor Technics MSW-GP33-70 Manual De Instrucciones página 31

3.3.
Working with the unit
3.3.1 Operation of the unit
Before (first) start-up
• Place the unit on a flat, solid surface, not tilting it more than 20
proper
• Check the engine oil level (see section 3.2)
• Fill the tank with fuel - to do this unscrew the tank cap and fill the tank
taking care not to pour fuel over the maximum level indicator i.e. the red
mark on
Replace the filler cap by tightening it all the way.
• Fill the pump with (clean) water - to do so, unscrew the filler cap and fill up
with
Screw the water filler plug back on.
IMPORTANT: a running pump is cooled by the water flowing through it,
therefore it must not be started "dry" - risk of overheating and leakage!
the filter located
water up
vertical
in the
to
from the
o
position.
tank filler hole.
the cap.