Publicidad
PULSE OUTPUT CONFIGURATION CHANGE
The pulse output configuration change event log is shown below. The log tracks changes to pulse output configu-
ration programming. The event counter has a capacity of 1000 (1-1000). Details of the last 10 changes are logged.
"L 0": L = Dispenser was in liters mode at this PO change
0 = pulse output is disabled
"P 01" Pulse output change record #1
"G 100": G = Dispenser was in Gallons mode
"P 02" Pulse output change record #2
PO 3-9" Pulse Output Resolution change records #3-#9
"nonE" = No Changes
"UC 10" = Unit of measure change record 10
WU017834
Rev 02
CLEAR
"2" = Event Counter, 2 total changes
"L 0": L = Dispenser was in liters mode at last PO change
0 = pulse output is disabled
"P0ut" Pulse output change log
toggle
toggle
at this PO change
100 = 100 pulses/gallon
06/2020
H Pistas de auditoría metrológicas en iGEM de EE.UU.
CLEAR
"9.30.09" = Date of change
"09.04" = Time of change
"PO 1" = Pulse output change record 1
177
Publicidad
