Levoit VeSync Core 600S Serie Manual Del Usuario página 12

EN
USING YOUR PURIFIER (CONT.)
Auto Mode
Auto Mode uses AirSight Plus™, a smart
laser dust sensor inside the air purifier, to
adjust the fan speed automatically based
on air quality. For example, if the air quality
is bad, the fan will automatically be set to
high speed.
Note:
•
The air purifier will take 5 seconds
to detect the air quality each time it
is turned on. During this time, the air
quality indicator rings will be blue. After
5 seconds, the air quality indicator
rings will change colour based on the
detected air quality.
•
Auto Mode does not use the turbo fan
speed.
•
The VeSync app also supports
additional auto modes: Quiet Auto
Mode, Efficient Auto Mode, and ECO
Auto Mode (see page 15).
Indicator Colour
Blue
Green
Orange
Red
12
Air Quality Indicator Chart
Air Quality Auto Mode Fan Speed
Very Good
Good
Moderate
Bad
PM2.5 Display
The PM2.5 value on the display shows the
amount of airborne particles (µg) that are
detected per 1 cubic metre (m³) of air volume.
PM2.5 refers to particulate matter (PM) that
is less than or equal to 2.5 microns (µm) in
diameter. These particles, also known as
"fine particles", are so small that they can only
be detected with an electron microscope,
and they stay in the air longer than heavier
particles such as dust and mould.
Your air purifier's AirSight Plus Laser Dust
Sensor detects the amount of PM2.5 particles
that are in a given space (µg/m³). Generally, the
lower the number, the better your air quality.
A number above 115 indicates that there is an
unhealthy amount of fine particles in the air.
Sleep Mode
Low
Medium
High
PM2.5 Range
0–35 ug/m
3
36–75 ug/m
3
76–115 ug/m
3
> 115 ug/m
3