Levoit VeSync Core 600S Serie Manual Del Usuario página 7

C O N T R O L S & D I S P L AY
Note: You can also use the VeSync app to control these functions, as well as additional app-only features
(see page 15).
On/Off Button
•
Turns the air purifier on/off.
•
Press and hold for 5
seconds to configure the
air purifier. See the VeSync
in-app instructions for more
information.
•
Press and hold for 15 seconds
to reset the air purifier and
disconnect from Wi-Fi (see
page 10).
Air Quality Indicator Rings
•
These indicators use an
automatic sensor to display
the air quality: Blue (Very
Good), Green (Good), Orange
(Moderate), and Red (Bad).
Wi-Fi Indicator
•
Turns on, off, or blinks to
indicate pairing status. See the
VeSync in-app instructions for
more information.
Light Sensor
•
When Light Detection is turned
on in the VeSync app, this sensor
detects the amount of light in the
room to automatically adjust air
purifier settings (see page 14).
Fan Speed Button
•
Cycles through fan speeds:
low (1 indicator will light up),
medium (2 indicators), high (3
indicators), and turbo
(4 indicators).
•
Tapping the Fan Speed Button
while the air purifier is in Auto
Mode or Sleep Mode (if the
display is on) will exit that
mode.
Sleep Mode Button
•
Turns Sleep Mode on/off (see
page 11).
Timer Button
•
Cycles through timer options
(see page 13).
•
Press and hold
seconds to begin cycling
through the timer options in
1-hour increments.
Auto Mode Button
•
Turns Auto Mode on/off (see
page 12).
EN
for 2
7