MedComp SPLIT STREAM Instrucciones De Uso página 6

6. Inject heparin into each lumen using quick bolus technique.
Caution: Each lumen should be completely filled with heparin to
ensure effectiveness.
7. Close extension clamps and white secondary clamps.
Caution: Clamps should only be open for aspiration, flushing, and
dialysis treatment.
8. Remove syringes.
9. Attach a sterile injection cap onto the female luers of the
extension set.
• In most instances, no further heparin is necessary for 48-72
hours, provided the lumen(s) has not been aspirated or flushed.
Medcomp WARRANTS THAT THIS PRODUCT WAS MANUFACTURED ACCORDING TO
®
APPLICABLE STANDARDS AND SPECIFICATIONS. PATIENT CONDITION, CLINICAL
TREATMENT, AND PRODUCT MAINTENANCE MAY EFFECT THE PERFORMANCE OF
THIS PRODUCT. USE OF THIS PRODUCT SHOULD BE IN ACCORDANCE WITH THE
INSTRUCTIONS PROVIDED AND AS DIRECTED BY THE PRESCRIBING PHYSICIAN.
Because of continuing product improvement, prices, specifications, and model availability
are subject to change without notice. Medcomp
contents without notice.
Medcomp is a registered trademarks of Medical Components, Inc.
®
Split Stream is a trademark of Medical Components, Inc.
®
WARRANTY
reserves the right to modify its products or
®
-4-