Publicidad
Idiomas disponibles
Idiomas disponibles
2. The chart is allowed to dry for a period of time that depends on the paper type, so that the colors have time to
stabilize.
3. The chart is scanned and measured using the HP Embedded Spectrophotometer.
4. From the measurements made by the spectrophotometer, the printer calculates the necessary correction factors
to apply for consistent color printing on that paper type. It also calculates the maximum amount of each ink that
can be applied to the paper.
If color calibration fails, check whether a color is missing from the chart. A missing color may be caused by a
printhead problem.
Matte black is not used on glossy or satin papers, so that column of the chart is not printed when calibrating those
paper types.
Front-panel error messages
If you see an error message that does not appear here, and you feel in doubt about the correct response, contact
HP Support.
Message or code
[Color] cartridge has expired
[Color] cartridge is missing
[Color] cartridge is out of ink
[Color] printhead #[n] error: not
present
[Color] printhead #[n] error:
please remove
[Color] printhead #[n] error:
replace
[Color] printhead #[n] error:
reseat
9
Introductory Information
Recommendation
Replace the cartridge.
Insert a cartridge of the correct color.
Replace the cartridge.
Insert the correct printhead.
Remove the incorrect printhead and insert a new printhead of the correct type
(color and number).
Remove the non-functional printhead and insert a new printhead.
Remove and reinsert the same printhead, or try cleaning the electrical
connections. If necessary, insert a new printhead.
Publicidad
