KEKAI KTP2090 Manual De Instrucciones página 18

4. Set current TIME/DAY (can set both under standby mode & working status):
Press " "button for one time, the display shows "12" as default,press"
set current hour; press "
" to set current minute ,then press "
press " / " to set current day(Monday-Sunday: d1-d7) . Then press"
confirm the setting, the display will show previous settings.
For example: Setting to Wednesday, 9:30 AM under 25℃ under II heating, pls. refer to the
following photos:
Note:
- After the product is power off,it needs to be reset, then press" " to check the current
time & day in turn;
2.Set temperature
During working status, Press"
" / " to set desired temperature (temperature range 10-49℃), press"
confirm the setting.
For example：The current ambient temperature is 15℃, when set temperature to 25℃,the
display shows as below:
Note:
" again, the display shows minute " 30", press"
" for third time, the display shows the day"
/ ",the display shows " 23 " as default. Press
/ " to
/
",
" to
" to