Publicidad
Idiomas disponibles
Idiomas disponibles
display"23"by default.Press"
detection mode, once the ambient temperature drops 5-10℃ within 10 minutes, then the
product will stop working within 30 minutes and enter into stand by mode. Then press
"
"to turn on the product.
Press "
" again to turn off the open-window detection, the light "
and the product will resume to previous working mode.
Below is an example to set 23℃ during open-window detection.See below :F
3).When turn on at the same time for both open-window detection and weekly program,
during the OFF period of weekly program, the product doesn't work. During the working
status of weekly program, the temperature is subject to the setting temperature of
open-window detection. See below :G
Note:
-
Before turn on weekly program: it must set day and time period,otherwise the weekly
default state is "00", which does not work.
F
Specifications
Power Supply: AC 220-240V ~ 50Hz
Power Consumption: 2000W
Class II
REMOTE CONTROL
The remote control requires 1 CR2025 3V lithium battery
Important: Follow the instructions of use and the recycle rules given on the battery packaging.
1- Open the battery compartment by sliding the cover down.
2- Insert the battery into the compart-ment,
observing the polarity in the dia-gram (see below drawing).
3- Close the battery compartment.
/
"to set target temperature. During open-window
G
"will go off
Publicidad
