KEKAI KTP2090 Manual De Instrucciones página 19

When setting temperature, it will use SMART working way:
1)Setting temperature – ambient temperature>2℃, working with high power;
2)0℃<Setting temperature – ambient temperature=<2℃, working with low power;
3)Setting temperature – ambient temperature=0℃, the cool fan will work for 30seconds to
below out the heating left inside, then enter into standby mode.
4)after enter into standby mode, if the machine cool down and:
Setting temperature – ambient temperature>=2℃, the machine will wake up and resume to
heating.
If you want to cancel the setting temperature, press " " key to choose the heating I or II,
the product will work without setting temperature. While the display " " will go off, and
℃
will show "--". After continuous heating for 12hours, the cool fan will work for 30seconds
and enter into standby mode.
Set weekly program(ONLY by remote control)
After complete setting of current TIME/DAY, below is the steps to set weekly program:
1)Press " ", the product enter into working status.
2)Press " ",the display shows "P", it enter into weekly program setting:See below :A
3).Press" ",the display shows d1~d7, set to working day(Monday-Sunday: d1~d7). Such
as set Monday:See below :B
Note:
In order to distinguish between setting current day & working day:
Current day - Monday-Sunday: d1~d7
Working day - Monday-Sunday: d1~d7
4).Press" ", the display shows P1~P6(for each day, it can be set maximum 6 time
periods).Such as setting P1:See below :C