Vorwerk Kobold VG100 Manual De Instrucciones página 46

1
2
3
46
5.4
Applying the microfibre cloth
1. Lay the microfibre cloth, cleaning side down (1), onto the tray so
that it is flush with the edges of the tray.
2. Place the window cleaner onto the microfibre cloth (2).
First, hold the device so that it is tilted with the back edge against
the rear edge of the tray.
3. Then tip the window cleaner forward until the rubber blade is
positioned in the recess of the tray (3).
4. Lift up the window cleaner and check that the microfibre cloth is
straight and flush with the edges of the device. The rubber blade
must not be covered by the microfibre cloth.
Always position the window cleaner in the centre of the designated
area on the tray.
1. Ensure that the microfibre cloth is correctly applied.
2. The rubber blade should project into the recess provided.
Note If the window cleaner is stowed incorrectly for a long period of time,
the rubber blade could get damaged.
6
Operation
6.1
Switching on the window cleaner
1 • Press the on/off switch (1) to switch on the window cleaner. The
function display comes on and the LEDs light up continuously
according to the battery charge level (see
[} 47]).
Function display