Publicidad
Idiomas disponibles
Idiomas disponibles
2
3
Note Remove any coarse dirt from the surface being cleaned before using
Note The dirty water tank must be emptied when the maximum fill level is
1. Applying slight pressure, slowly guide the window cleaner in
straight lines all the way down to the bottom edge of the window
(2).
Please note: you must guide the rubber blade all the way down to
the bottom of the glass pane and then pull it away from the
window with a slight tilting motion (3). This is the only way to
completely clean the surface and remove all the water.
2. Continue cleaning as described (moving across to the left or right)
until the window pane is completely cleaned.
the window cleaner.
Avoid meandering movements while cleaning, as this will adversely
affect the quality of the clean.
We recommend regularly cleaning the sealing blades with a cloth.
If you notice a deterioration in cleaning quality, it is likely that the
cleaning concentrate and water are used up, the microfibre cloth is
dirty and/or the rubber blade is extremely dirty. An incomplete clean
and/or inadequate wetting of the window pane during cleaning are
indications of a deterioration in cleaning quality.
6.8
Emptying the dirty water tank
reached. Empty the dirty water tank every time the tank is removed.
1. Remove the tank as described in the section
tank
[} 47].
2. Rotate the tank so that both openings are facing upwards.
3. Open the tank by pulling the green rubber closure upwards.
4. Pour out the dirty water.
5. Rinse the dirty water tank with fresh water and empty the tank
again.
6. Close the dirty water tank again with the rubber closure.
Filling the fresh water
51
en
Publicidad
