Bauknecht BAK5S KP8V2 BLG Guía Rápida página 8

After cooking and with the function deactivated, the icon
may continue to remain visible on the display even after the
cooling fan has switched off to indicate that there is residual
heat in the compartment.
Please note: The time after which the icon switches off varies
because it depends on a series of factors such as ambient
temperature and function used. In any case, the product should be
considered to be off when the pointer on the selection knob is at
"0".
4. PROGRAMMING COOKING
You will need to select a function before you can start
programming cooking.
DURATION
Keep pressing until the
on the display.
Use or to set the cooking time you require, then press
to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: an audible signal will sound and the
display will indicate that cooking is complete.
Please note: To cancel the cooking time you have set, keep pressing
until the icon starts flashing on the display, then use
reset the cooking time to "00:00". This cooking time includes a
preheating phase.
PROGRAMMING THE END COOKING TIME/
DELAYED START
After a cooking time has been set, starting the function can be
delayed by programming its end time: press
icon and the current time start flashing on the display.
Use or to set the time you want cooking to end and
press to confirm.
Activate the function by turning the thermostat knob to the
temperature you require: the function will remain paused until
it starts automatically after the period of time that has been
calculated in order forcooking to finish at the time you have
set.
Please note: To cancel the setting, switch the oven off by turning
the selection knob to the
Please note: Delay to start functionality is not available for Grill and
Turbo Grill functions.
icon and "00:00" start flashing
until the
position.
END OF COOKING
An audible signal will sound and the display will indicate that
the function has finished.
Turn the selection knob to select a different function or to
to switch the oven off.
Please note: If the timer is active, the display will show "END"
alternately with the remaining time.
5. SETTING THE TIMER
This option does not interrupt or program cooking but
allows you to use the display as a timer, either during while a
function is active or when the oven is off.
Keep pressing until the
on the display.
Use or to set the time you require and press
confirm. An audible signal will sound once the timer has
finished counting down the selected time.
Notes: To cancel the timer, keep pressing
starts flashing, then use
6. AUTOMATIC CLEANING FUNCTION – PYRO
Do not touch the oven during the Pyro cycle.
Keep children and animals away from the oven during
to
and after (until the room has finished airing) running
the Pyro cycle.
Remove all accessories - including shelf guides - from the oven
before activating the function. If the oven is installed below
a hob, make sure that all the burners or electric hotplates are
switched off while running the selfcleaning cycle.
For optimum cleaning results, remove excessive residuals
inside the cavity and clean the inner door glass before using
the pyrolytic function.
Avoid activating the pyro cycle cleaning in the presence of
limescale residues.
We recommend only running the Pyro function if the
appliance contains heavy soiling or gives off bad odours
during cooking.
To activate the automatic cleaning function, turn the selection
knob and the thermostat knob to the
will be activated automatically, the door locked and the light
inside the oven switched off: The display will show the time
remaining to the end, alternating with "Pyro".
Once the cycle has been completed, the door remains locked
until the temperature inside the oven has returned to a safe
level. Air the room during and after running the Pyro cycle.
icon and "00:00" start flashing
until the
to reset the time to "00:00".
icon. The function
to
icon