WAGNER PROJECT SPRAYER Manual Del Usario página 5

Material container setup :
1. Fill the container with the material to be used.
3. Insert the suction tube into the intake opening.
Flow Control knob:
The spray pattern is controlled by the Flow Control Knob on
the rear of the sprayer, and by the thickness of the material
being sprayed.
Turning the flow knob counterclockwise increases the
amount of material flow. Turning the flow knob clockwise
decreases the amount of material flow.
Setup
2. Place a few drops of household oil down the intake (a)
and return openings (b) in the pump housing.
(a)
4. Thread the container securely to the sprayer. Plug in
the sprayer.
5
(b)
English