Risk of electric shock if water
enters appliance.
Risk of an electric shock
from improper connection
to the power supply.
Risk of an electric shock if
the base unit or power cord
are damaged.
Fire hazard.
4.1
Hazards and Safety Instructions
If water gets into the electrical components, you could get an electric shock.
•
Always unplug the appliance when it is not in use.
•
Do not immerse the base unit in water or other liquids.
•
Do not hold the base unit under running water.
•
Do not pour water over the base unit.
•
Disconnect the appliance from the mains power supply before cleaning the base
unit.
•
Clean the base unit with a dry or damp cloth only.
•
No water or dirt should enter the base unit.
•
Do not use the appliance outdoors.
•
If water has managed to get into the appliance, contact your Vorwerk repair
service.
An incorrectly installed power connection may cause an electric shock.
•
Only connect the base unit to a plug installed by a qualified specialist.
If the base unit or power cord are damaged, you could get an electric shock.
•
Regularly inspect the base unit, power cord and accessories for possible
damage.
•
Ensure that the power cord does not touch hot surfaces or external heat
sources.
•
Never use the base unit if the power cord is damaged.
•
Do not use the base unit if it is dropped or damaged in any way.
•
In the event of damage to the base unit or the power cord, return the base unit
to the Vorwerk repair service for examination, repair or electrical or mechanical
adjustment.
•
If the power cord on the base unit has been damaged, it must be replaced by the
manufacturer, its repair service or a similarly qualified person to avoid hazards.
•
Never attempt to repair the base unit yourself.
•
Never put your fingers into the openings that are intended for the contact pins
on the base of the mixing bowl and do not insert any objects into these
openings.
If the base unit is placed on a hot surface, it may start to burn.
•
Do not put the base unit on a stove (hob, ceramic hob, induction hob or similar)
or on any other heated or heatable surface.
•
Keep the appliance a sufficient distance from hot surfaces and external heat
sources.
•
Ensure that the power cord does not touch hot surfaces or external heat
sources.
Thermomix® TM6
en
9