IRSAP RELAX HYBRID Manual De Instalación, Uso Y Mantenimiento página 46

3.5 Installation
HORIZONTAL VERSION
The example below shows the version with right-hand hydraulic connection and left-hand
electronic connection:
- Use the template provided to
mark out the connections
and fixings
- Use a suitable drill bit to make
the bores and insert the plugs provided
- LOOSEN THE CLOSING SCREWS
• Loosen the screws from the grille and
remove the grille (1)
• Loosen the closing screws (2)
• Take out the internal unit
- PLACE the internal wall unit level with the holes
44
Ø16
Ø16
CONNESSIONI A DESTRA - RIGHT CONNECTIONS
FORO Ø10 PER TASSELLO FORO Ø10 PER TASSELLO
Ø10 HOLE FOR DOWEL Ø10 HOLE FOR DOWEL
1320 1120
SPAZIO PREPOSTO PER CONNESSIONI ELETTRICHE SPAZIO PREPOSTO PER CONNESSIONI ELETTRICHE SPAZIO PREPOSTO PER CONNESSIONI ELETTRICHE
AREA FOR THE ELECTRICAL CONNECTIONS AREA FOR THE ELECTRICAL CONNECTIONS
FORO Ø10 PER TASSELLO FORO Ø10 PER TASSELLO
Ø10 HOLE FOR DOWEL Ø10 HOLE FOR DOWEL
FILO PAVIMENTO
FLUSH OF THE FLOOR
4x
2
1
2
1
Ø16
DIMAREHM
0522/7894
FORO Ø10 PER TASSELLO FORO Ø10 PER TASSELLO
Ø10 HOLE FOR DOWEL Ø10 HOLE FOR DOWEL
920
SCARICO CONDENSA
MURO CONDENSATE DRAIN
WALL
35
INGRESSO ACQUA USCITA ACQUA
AREA FOR THE ELECTRICAL CONNECTIONS
INLET WATER OUTLET WATER
SPAZIO PREPOSTO PER PER IL PASSAGGIO DEI TUBI
AREA FOR THE INWAY HOLE OF THE PIPE
FORO Ø10 PER TASSELLO
Ø10 HOLE FOR DOWEL
FORO Ø10 PER TASSELLO
Ø10 HOLE FOR DOWEL
SPAZIO PREPOSTO PER PER IL PASSAGGIO DEI TUBI
AREA FOR THE INWAY HOLE OF THE PIPE