AENO EG2 Manual Del Usuario página 9

Cooking time may take 5 to 8 minutes depending on the type of a food
product, its thickness or the desired degree of doneness. Excess oil or grease
will be drained through the drain hole (5) into the drip tray (6).
If the food product is recognised as being well cooked, open the grill after the
blue LED goes out only, because it will be switched off at that moment.
After cooking is done, turn the temperature control knob (1) to the "0" position,
unplug the grill and open the top cover to cool down the device.
Troubleshooting
1. The grill does not turn on. Possible causes and solutions: Make sure that
there is no power supply failure in the mains socket (e.g. plug any known
good device into it) and that the grill is correctly plugged into the mains
socket.
2. The grill turns on but does not heat up. Possible causes and solutions: Make
sure that the temperature control knob (1) is not set to the "0" position.
3. Blue LED (3) does not flash. Possible causes and solutions: Unplug the grill,
let it cool down and plug it back in the mains socket. Then, turn the
temperature control knob (1) to another position.
ATTENTION! If your problem persists, please contact your local supplier or the
service center for support. Please do not disassemble the device or try to repair
it on your own.
aeno.com/documents 9