Console Holder Arm Assembly - Mondolfo Ferro TBE155 Manual De Uso

CAUTION
Gripping the various projecting parts of the
structure in a manner not recommended here
is absolutely forbidden.
When moving the machine after installation,
position it as shown in Fig.4A to guarantee
that the load is correctly balanced:
table holding arm completely lowered, the
turntable closed, the tool holder carriage at
its end of stroke, near the arm.
Fasten the arm with the control console to
the tyre changer structure (see Fig. 4A).
40
1
the turn-
4A
CONSOLE HOLDER
ARM ASSEMBLY
The column and console mounting arm are
disassembled and arranged on the pallet (see
Fig. 4B)
4
The two elements of the articulated arm are
bound together (see Fig. 4C)
Fasten the mounting column to the tyre changer
with the two M10x25 screws (see Fig. 4D).
- E
- Operator's manual TBE 155
nglIsh
4B
4C
4D