Safety Regulations - Mondolfo Ferro TBE155 Manual De Uso

SAFETY REGULATIONS

The equipment is intended for professional use
only.
WARNING
Only one operator may work with the equipment
at a time.
WARNING
Failure to comply with the instructions and
danger warnings can cause serious injuries to
the operator or other persons.
Before starting up the equipment, always ensure
you have read and understood all the danger/
warning signs in this manual.
In order to operate the machine correctly, it is
necessary to be a qualified and authorised opera-
tor, able to be trained and to know the safety
regulations. Operators are expressly forbidden
from using the machine under the influence of
alcohol or drugs capable of affecting their capacity
to perceive danger.
The following conditions are essential:
- read and understand the information and instruc-
tions described in this manual;
- have a thorough knowledge of the features and
characteristics of the machine;
- keep unauthorised persons well clear of the
working area;
- make sure that the machine has been installed
in compliance with all relevant standards and
regulations in force;
- make sure that all machine operators are suit-
ably trained, that they are capable of using the
machine correctly and safely and that they are
adequately supervised during work;
- do not touch power lines or the inside of electric
motors or other electrical equipment before
making sure that they have been powered off;
- read this booklet carefully and learn how to use
the machine correctly and safely;
- always keep this operator manual in a place
where it can be easily accessed and do not
neglect to consult it.
WARNING
Do not remove or deface the DANGER, WARNING,
CAUTION or INSTRUCTION decals. Replace any
missing or illegible decals. If one or more decals
have been detached or damaged, replacements
- E - Operator's manual TBE 155
nglIsh
can be obtained from your nearest MONDOLFO
FERRO dealer.
- Observe the unified industrial accident preven-
tion regulations relating to high voltages and
rotating machinery whenever the machine is in
use or being serviced.
- Any unauthorised alterations made to the ma-
chine automatically release the manufacturer
from any liability in the case of damage or ac-
cidents attributable to such alterations. Specifi-
cally, tampering with or removal of the machine
safety devices is a breach of the regulations
relating to Safety at Work.
WARNING
During work and maintenance operations, always
tie back long hair and do not wear loose clothing,
ties, necklaces, wristwatches or any other items
that may get caught up in the moving parts.
WARNING
Keep unauthorised persons away from the work-
ing area (Fig. 7).
1500
WARNING
Before performing any service operations on the
hydraulic system, position the machine in the
resting mode with the turntable bar lowered
and the turntable completely closed.
UK
2000
7
43