Tyco Electronics AMP CO Plus 45x45 Guia De Inicio Rapido

ENGLISH
1. INTRODUCTION.
This Instruction sheet describes the operations required for installation of AMP CO Plus 45x45 Kit (PN 1711488-[])
according to Mosaic™ environment.
For further information refer to appropriate customer drawings: C-1711488.
Figure 1
2. PRODUCT DESCRIPTION.
Tyco PN
1711488-1
1711488-2
3. CABLE PREPARATION, ASSEMBLY INSTRUCTION AND ENVIRONMENT APPLICATION.
1
Application environment:
Mosaic™ type wall mounted or equivalent.
©2010 Tyco Electronics AMP España, S.A., Barcelona, (Spain)
All International Rights Reserved
AMP, AMP NETCONNECT, AMP-TWIST, TE logo and Tyco
Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
AMP* CO PLUS 45x45 MOSAIC KIT:
PN 1711488- [ ]
Housing Housing
Front panel Front panel
Description
AMP CO PLUS 45x45 MOSAIC KIT IVO
AMP CO PLUS 45x45 MOSAIC KIT WHI
2
Terminate the Shielded edge connector,
selecting the adequate cable exit, according
Conduit or
to Instr. Sheet 411-22045, using template
346547-1 and adequate tool.
TOOLING ASSISTANCE CENTER 1-800-722-
1111
PRODUCT INFORMATION 1-800-522-6752
Tie Tie
Shielding Shielding
cover cover
Shielded Shielded
edge edge
connector connector
Instruction Sheet
411-93010
11/Mar/2010 Rev C
Adapter Colour
Ivory RAL 1013
White RAL 9010
3
Once cable exit has been selected (top,
right or left type), insert the Shielded
edge connector into housing.
This controlled document us subject to change.
For latest revision and Regional Customer
Service,
Visit our website at www.tycoelectronics.com
1 of 4
LOC
IK