AVS Electronics BF 100 A Manual Del Usuario página 22

INSTALLATION
For installation onto the wall either reflector and beam need flat cylindrical-head
screws.
E
N
G
Check not to have reflecting bodies, such as glasses, mirrors etc. possibly affecting
the signal, in the area nearby.
Install the Transmitter in the chosen point and keep it in axis to the
Receiver as much as possible
Insert the calibration accessory BF TEST
(necessary for a correct calibration) in the
proper openings, as shown on the drawing on
the side, keeping the alignment hole on the top.
Install the Receiver in the chosen point and keep it in axis to
the Transmitter as much as possible
Alignment hole
Fixing holes
Alignment hole
Fixing holes
Insert the calibration accessory BF TEST
(necessary for a correct calibration) in the proper
openings, as shown on the drawing on the side,
keeping the alignment hole on the top.
MIN 5 MT
MAX 100 MT
- 22 -
IST0675V2.2