Publicidad
OPERATING INSTRUCTIONS
1. To Attach Battery Pack
a. Align the raised portion on the battery pack
with the grooves on the bottom of the work
light, and then slide the battery pack onto the
light as shown.
b. Make sure that the latch on the battery pack
snaps into place and the battery pack is
secured to the work light before beginning
operation.
NOTICE: When placing the battery pack on the
work light, be sure that the raised rib on battery
pack aligns with the groove on the light and
the latches snap into place properly. Improper
assembly of the battery pack can cause damage to
internal components.
To Detach Battery Pack
a. Press the battery-release buttons to release the battery pack.
b. Pull the battery pack backward to remove it from the work light.
WARNING
• Battery tools are always in operating condition. Therefore, always remove the battery pack
when the light is not in use or when carrying the light at your side.
2. ON/OFF Switch
a. To turn the work light ON, depress the ON/OFF
switch (A).
b. To turn it OFF, press the switch again.
NOTICE: If the light starts flashing intermittently
and then turns off, it's an indication that the battery
charge is low. Please recharge the battery pack.
1
Battery-release Buttons
2
A
7
Publicidad
