Publicidad
TROUBLESHOOTING
WARNING
Place the direction-of-rotation selector (B) in the center lock position and detach the battery
pack from the impact driver before performing troubleshooting procedures.
PROBLEM
The impact driver does not
work.
Bit cannot be installed
Motor overheating.
The LED worklight flashes
rapidly.
The LED worklight flashes
slowly.
The tool suddenly slows down/
stops during driving screw.
WARRANTY
For 5 years from the date of purchase, the power tool is warranted and for 3 years from date of
purchase the battery & charger are warranted for the original purchaser to be free from defects
in material and workmanship. This guarantee does not cover damage due to abuse, normal
wear, improper maintenance, neglect, unauthorized repair/alteration, or expendable parts and
accessories expected to become unusable after a reasonable period of use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Battery pack charge is
depleted.
.
Bit does not fit the quick-
change collet.
Ventilation slots are
obstructed.
The tool has stopped
working to protect internal
circuits.
The battery pack charge is
very low.
The tool is operating in
the wrong mode or speed
range.
CORRECTIVE ACTION
Charge the battery pack.
Only use bits with power
grooves. Or use a universal
bit adapter with power
grooves.
Clean and clear ventilation
slots. Do not cover ventilation
slots with hand during
operation.
Release the trigger switch,
wait for the tool to cool down,
then and start the tool again.
Charge the battery pack.
Check the selected mode,
refer to the "Speed Range
Selection" and "Mode
Selection" sections.
16
Lowe's Home Centers LLC.
MOORESVILLE, NC 28117
Printed in China
Publicidad
