Publicidad
OPERATING INSTRUCTIONS
3. Variable-speed Trigger Switch
a. Position the direction-of-rotation selector (D) to
the left or right of the tool as needed to unlock
the trigger switch (E).
b. To turn the drill/driver ON, depress the trigger
switch (E).
c. To turn it OFF, release the trigger switch (E).
Variable Speed
The variable-speed trigger switch delivers higher
speed with increased trigger pressure and lower
speed with decreased trigger pressure.
Electric Brake
The drill/driver is equipped with an electric brake.
When the trigger switch is released, the electric brake engages automatically to quickly stop
rotation
4. Two-Speed Gear Box
The drill/driver has a two-speed gear box designed
for drilling or driving at two different variable-speed
ranges. The gear selector (C) is located on the top
of the drill/driver, allowing you to select either "1"
(Low) speed range or "2" (High) speed range.
a. Setting "1" will deliver lower speeds and
increased power and torque. Use setting "1" for
heavy-duty work or driving screws.
b. Setting "2" will deliver higher speeds and
reduced power and torque. Use setting "2" for
drilling wood and wood composites and for
using abrasive and polishing accessories.
NOTICE: Never change gears while the tool is running. Failure to obey this caution could
result in serious damage to the drill/driver.
3
D
4
10
E
C
Publicidad
