Publicidad
STEP 6
NOTE: ASSEMBLY SHOWN FOR 96 IN. OPENING HEIGHT. The following assembly
should be modified based on your opening height, SEE CHART ON PAGE 4.
1. Insert the spring stoppers (L) into the ends of the spring, as shown. NOTE: Spring is packed
inside straight tube (B).
2. Place straight tube (B) on top of the assembly. Insert three spacers (F) into the straight tube (B),
as shown.
spring
Pg 8 of 20
L
F
spring is packed inside
straight tube (B)
B
1-800-892-3986
IS2157
Publicidad
